GreyFox Studio · Blender

Fetter Pro

Wrap, hang, coil or lay chains and ropes on any mesh in Blender, with hand-modelled padlocks and hooks.

  • Blender 5.1
  • Python
  • Chains & Ropes
  • Hang & Slack
  • Live Settings
  • Game Ready
  • Padlocks & Hooks (Pro)
Fetter Pro add-on cover
  • Status Available on Gumroad and Superhive
  • Current version 1.10.0
  • Tested Blender versions Blender 5.1 — Requires Blender 4.2 or newer
  • Last updated 2026-11-18
  • Support support@greyfoxstudio.ca

Built for props: chained coffins, bound crates, roped barrels, sealed chests, shackled statues, a skeleton tied to a tree, a chain hanging between two posts.

Overview

Fetter Pro wraps chains and ropes around any mesh in one click. Drag a line across your prop, or pick a few of its edges or faces, then dial in the turns, the spacing, the tilt and the link size live. Every link is a real interlocking link that never cuts into the prop or into its neighbours, and every closed ring closes seamlessly. Select two posts and a chain hangs between them; pick a curve and a chain or a rope lies along it.

Draw, pick or hang -> Tune it live -> Finalize -> Export

New in 1.10.0

  • Padlocks and a hook modelled by hand: a Medieval padlock (a shield-shaped forged lock, keyhole on the front), a Modern one (a block lock, key at the bottom) and an Eye Hook (a forged hook on a riveted swivel eye). The S-Hook stays
  • Game ready: under 1,500 triangles each, unwrapped with no overlap, with their own sharp edges
  • Where the shackle or the eye goes through a link it is made thinner if a tight chain leaves it little room; the lock keeps its size. On a chain lying on a surface it slides up the link’s hole and turns up just enough to rest over the links around it

New in 1.9.0

  • Coiled Rope and Coiled Chain: a coil on its own, made at the 3D cursor. Hang it on a peg (its origin is the peg: snap it onto a nail), drop it on the floor or lay it flat. Gather at Peg draws the loops together on the peg so a short hook holds them
  • Plain Tube: a rope as a simple tube, a real low poly. Make Bake Pair on a rope now makes its _low as that tube (61,000 triangles down to 4,200 on a coil) and its _high as the twisted rope
  • Fixed: a one-turn spiral between two bars is now one clean loop, and a rope around separate edges goes around the whole bar or post each edge runs along

Features

Draw it

  • Draw Wrap: no Edit Mode and no edge to select. Drag a line across the object and the chain or rope goes around it there, on any mesh, even a decimated one. It goes round the parts your line crosses, and the parts touching them
  • Height and Lean move and lean the wrap afterwards

Hang it

  • Hang Chain and Hang Rope between two selected objects, fixed on the sides that face each other
  • Sag and Anchor Height set how it hangs; hooks go on its free ends

Tie a second object in

  • Tie Another Object: wrap a tree, click the skeleton with the pipette, and the rope goes around both and ties them together. The meshes parented to the object are tied too

Coil it

  • Coiled Rope and Coiled Chain at the 3D cursor: Hanging on a peg, Lying on the floor in a dropped heap, or Flat in a spiral
  • Loops, Size, Loop Width, Messiness, Gather at Peg and Ends; move, turn or scale it and it keeps its place

Lay it on a curve

  • Chain on Curve and Rope on Curve: click a curve with the pipette and a chain or rope lies along it, every spline of it (Bezier, poly or NURBS), with all the link, rope, padlock and hook settings
  • Garlands over a doorway, a rope down a wall. Edit the curve and it follows

Or pick edges or faces

SelectionWhat Fetter Pro does
Separate edges along the objectWraps around them and nothing else, the turns spread over their length (the 4 long corner edges of a crate, a coffin, a chest)
Faces, in Face Select modeWraps around the faces you pick and nothing else, or one wrap around each part (three posts of a pillory)
One edge loop around the objectGoes around the loop (a barrel, a pillar, a statue)
An open edge pathFollows the path (a chain laid along a beam or a railing)

Chains and ropes

  • Real interlocking links: each link alternates 90 degrees with its neighbour, closed rings always close seamlessly, and links never intersect, even at sharp corners or crossed at 45 degrees
  • Five link shapes: oval, square, round, stud and twisted
  • Tight wrap: flat on the faces, a link straddling each corner, never inside the mesh
  • Tighten closes the chain or rope in until it rests on the surface, or pushes it away; Slack lets the rings hang loose
  • Follow Shape: the wrap hugs the part of the mesh it goes around. A chain on a shaft stays on the shaft, even between a wide base and a wide head
  • Rings or spiral, any number of turns, spread over the selection, centered, forward or backward; turns never come closer than the chain or rope is wide
  • Crossed patterns: tilt the rings and alternate the tilt for X crossings, or randomize tilt and offset with a seed
  • Crossings go over: later wraps lift over earlier ones on the same object
  • Twisted rope: 1 to 8 strands, adjustable twist, ends plain, frayed, whipped or knotted

Padlocks and hooks

  • Padlocks modelled by hand, Medieval (shield-shaped, keyhole on the front) or Modern (block, key at the bottom), threaded through an upright link; around a post they hang straight down. On the first, middle or last ring, every other ring or all of them
  • Hooks: a forged Eye Hook on a riveted swivel eye, its eye through the last link, or an S-Hook, on the free ends of a spiral, an open chain or a hanging chain
  • Under 1,500 triangles each, their own material slot, Fetter_Lock_Iron, UVs with no overlap and their own sharp edges

Game ready

  • One mesh, every link its own island, smooth shading
  • Triangles per Link from 36 (games, seen from afar) to 4096 (close-up renders); a wrap too heavy for Blender is refused with what to change
  • UVs shared for a tiling material, or unique per link for painting wear in Substance 3D Painter
  • Plain Tube: a rope as a simple tube, a real low poly
  • Color per Link, Make LODs and Make Bake Pair (a rope’s _low is the plain tube)
  • Your own materials stay in their slots at every rebuild
  • Finalize turns the wrap into a plain mesh, ready for FBX or glTF export

Its own panel

A dark card with cyan accents in the Fetter tab of the 3D Viewport sidebar, in the order of the work: turns, tilt, fit to the surface, links or rope, variation, accessories, mesh and UVs, then Live Update, Rebuild and Finalize. Rest the pointer on any control for half a second and a popup explains it with a small diagram. Prefer Blender’s own panels? Turn on Classic Panels in the add-on preferences.

How it works

  1. Select your mesh and press Draw Chain or Draw Rope in the Fetter tab.
  2. Drag a line across the mesh, where the wrap goes.
  3. Tune turns, tilt, links or rope, or press Presets…: the wrap rebuilds live.
  4. To tie a second object in, press Pick the Object to Tie and click it.
  5. Press Finalize… and export.

Prefer to pick edges or faces? Press Select Edges or Faces, press 2 and Shift+Click the long edges, or press 3 and pick the faces, then press Wrap with Chain or Wrap with Rope.

For a chain between two posts: select both and press Hang Chain. For a rope along a shape of your own: draw a curve, press Rope on Curve and click the curve. For a coil to dress the scene: put the 3D cursor where it goes and press Coiled Rope.

Requirements

Blender4.2 or newer — tested on Blender 5.1.2
PlatformsWindows, macOS, Linux (pure Python, nothing else to install)
InstallationEdit > Preferences > Get Extensions > Install from Disk, pick the zip
PanelThe Fetter card needs Region Overlap (on by default); otherwise classic panels are shown

Scope limitation

A turn is pulled tight round the part of the mesh under it: it bridges hollows in that slice instead of following the surface into them. An open edge path rests on the convex hull of the whole object. Only the target object and the tied object are used as the collision shape. A tied object is held by a taut turn around the outline of both: the turn does not pass under an arm or make a knot, and one object can be tied per wrap. Slack makes rings hang below what they go round, but a ring around an upright post keeps its place, and it is not a physics simulation. A chain hanging between two objects, or laid on a curve, does not avoid the objects around it. A coil is shaped, not simulated: snap its origin onto a nail or set it on a floor. Hooks need free ends (a spiral, an open path, a curve or a hanging chain). On a chain lying on a surface, a padlock rests tilted over the links around it.

FAQ

Can I wrap more than one chain around the same object? Yes. Each new wrap lifts over the earlier ones where they cross.

Can I edit the links by hand? Yes, after Finalize. Before that, Fetter Pro rebuilds the wrap whenever a setting changes.

Can I tie one object to another? Yes. Wrap the first one, press Pick the Object to Tie and click the second one: the wrap goes around both.

Can I make a chain hang between two posts? Yes. Select both posts and press Hang Chain, then set the Sag. Move a post and the chain follows.

Can I make a coil of rope to hang on a nail? Yes. Put the 3D cursor where it goes and press Coiled Rope: its origin is the peg, so snap it onto the nail. Gather at Peg keeps the loops together on a short hook.

Are the padlocks game ready? Yes. Each padlock and the eye hook is a model under 1,500 triangles, unwrapped with no overlap, in its own material slot.

Do I need a clean edge loop? No. Draw Chain and Draw Rope only need a line dragged across the object, so they work on a decimated mesh too.

Does it work in centimeters? Yes. Default sizes follow the scene unit scale, and a number typed without a unit keeps the unit the field shows.

Can I sell games or assets that use wraps made with Fetter Pro? Yes. The meshes you make with Fetter Pro are yours, for personal and commercial projects.

Type to search titles, sections and keywords.