Quick start: chain a crate
Your first chain with Fetter Pro: pick the edges, wrap, tune, finalize.
- Select the crate and press Select Edges or Faces in the Fetter tab. Blender enters Edit Mode.
- Press 2 and Shift+Click the 4 long edges running along the crate (its corners). The line above the buttons says 4 separate edges: the wrap goes around them.
- Press Wrap with Chain. The chain appears around the crate, and the new wrap is selected.
- In Turns, set the number of turns. In Tilt, raise Tilt with the Alternate pattern to cross the rings in an X.
- Open Links to size the links to your crate, or press Presets… and pick Prison Chain.
- When it looks right, press Finalize… at the bottom of the card (or keep it live and come back later).
To lock the chain, open Accessories and turn on Padlock.
Last updated: 2026-11-18