Layouts and candles
The top of the Souls Candle card (layouts, BUILD CANDLE, Build on an Object..., New Seed, Presets...) and the Candles section: heights by position, diameter, spacing, cluster, stub and wax color.
All settings act on the selected candle while Live Update is on, and on the next candle you build. With several candles selected, the setting you change goes to all of them; each keeps the rest of its own settings. Sizes are in centimeters; “x” marks a multiplier.
Top of the card
| Control | What it does |
|---|---|
| Single | One candle |
| Pair | Two candles side by side (Left Height, Right Height) |
| Trio | Three candles in a triangle: one at the back, two in front (Front Left, Back and Front Right Height) |
| Row | Four candles side by side (Far Left, Left, Right and Far Right Height) |
| Cluster | Many candles of different heights in one wax mound, with its own sizes in the Candles section. See Cluster |
| Presets… | Ready-made looks, the Game Low Poly mesh, your own presets, Save as Preset…, Reset to Defaults. See Presets |
| BUILD CANDLE | Creates a new candle object with the current settings, under the 3D cursor: standing on the ground, or on the support object. On a support, it stands on the level under the cursor; a cursor that is not over the support sends the candle on top of it, and a place it cannot stand on sends it to the nearest place it can |
| Build on an Object… | Eyedropper: click an object in the viewport and a new candle stands on it where you click, with the current settings. It sets Stands On to Object and the Support. See Candles on an object |
| New Seed | Picks a new random seed: other drips, rim, wax balls, wick bend and cluster layout. See Variation |
| Full Detail Anyway | Shown when the selected candle is too heavy and shows as a coarse preview. See Performance |
Candles section
| Setting | Default | Range | What it does |
|---|---|---|---|
| Heights | 11 / 15 / 8 / 12 | 0.5 – 60 | Height of each candle, named by where it stands. Only the ones the layout uses are shown |
| Diameter | 4 | 1 – 10 | Diameter of each candle |
| Spacing (x) | 1.05 | 0.8 – 2.5 | Distance between candle centers, as a multiple of the diameter. 1 = touching, below 1 = merged. Not used by Single and Cluster |
| Candle Count | 12 | 2 – 40 | Cluster: how many candles it tries to fit in its radius. If they do not all fit, the status line says how many did and why |
| Cluster Radius | 7 | 2 – 40 | Cluster: radius of the area the candles stand in |
| Shortest Height / Tallest Height | 4 / 16 | 0.5 – 60 | Cluster: height of the shortest candles (toward the edge) and of the tallest (toward the middle) |
| Mound Height | 1.5 | 0 – 10 | Cluster: height of the wax mound that holds it together, highest against the candles. 0 = no mound |
| Average Diameter | 4 | 1 – 10 | Cluster: the average diameter; each candle varies from 60 % to 125 % |
| Burnt Down to a Stub | Off | Every candle as a nearly burnt-down stump sitting in its own wax. See Burnt Down to a Stub | |
| Height Left | 0.25 | 0.05 – 1 | With the stub on: how much of each candle is left (0.25 = a quarter of its height) |
| Wax Color | Cream | Color of the wax. Click the swatch for the color wheel. Each candle keeps its own color; it shows in Material Preview and renders, and stays in the HP copy and in the FBX (Color attribute) |
Heights by layout
The heights are named by where each candle stands:
| Layout | Heights shown | Defaults |
|---|---|---|
| Single | Height | 11 |
| Pair | Left Height, Right Height | 11 / 15 |
| Trio | Front Left Height, Back Height, Front Right Height | 11 / 15 / 8 |
| Row | Far Left Height, Left Height, Right Height, Far Right Height | 11 / 15 / 8 / 12 |
| Cluster | Shortest Height, Tallest Height | 4 / 16 |
The other settings of a candle — seed, live update, object name — moved in 1.2.0: see Variation, Live Update and Rebuild Selected and Export.
Last updated: 2026-11-09