Release notes

Release history of the Souls Candle Blender add-on, with Blender compatibility and known limitations.

This page records the release history of the add-on. The site-wide changelog presents the same information across all GreyFox Studio products.

1.3.0 — Holders

Version1.3.0
Date2026-11-09
Blender compatibilityBlender 5.1 or newer, tested on Blender 5.1.2
Store statusAvailable on Gumroad — coming soon on Superhive

New

  • Holder: Pricket Stand, Candlestick, Chamberstick, Plate and Wall Sconce, in wrought iron, brass, bronze or pewter (M_Holder_* materials). The candles stand in them and their wax runs over them: it pools on the drip pan or in the dish and hangs from its rim. The holder’s size follows the candles: a plate takes a trio or a whole cluster.
  • The holder is part of the candle: it follows it, a click on it selects the candle, and it is deleted with it. With Stands On on Object, its foot stands on the support.
  • Low poly with its own UV map: Export FBX and Make Game Asset put it in the files with the candle.
  • Presets keep the holder you picked.

Fixed

  • The card’s buttons did nothing — the click selected the object behind the card — while another add-on kept a tool running in the background, such as an overlay or another add-on’s card.

1.2.0 — Presets and game assets

Version1.2.0
Date2026-11-09
Blender compatibilityBlender 5.1 or newer, tested on Blender 5.1.2
Store statusAvailable on Gumroad — coming soon on Superhive

Fixed

  • A Souls Candle update that changes the wax nodes no longer empties the other candles of a file. Candles already emptied by an older update are repaired when the file opens.
  • Burnt Down to a Stub and short, wide candles: the wick no longer sinks into the wax.
  • Copies of a lit candle (Shift + D, Alt + D) get their flames; an Alt + D copy gets its own skeleton; turning or scaling a candle on its object is noticed.
  • Cleaner high poly: no hollows inside the wax, no loose specks, no hidden underside on the ground. Wax no longer comes out under a thin support, the wick of a tiny candle stays above the floor, and Make HP Copy keeps no skeleton data and hides the candle’s flames with it.
  • Settings changed in Edit Mode wait for Object Mode instead of failing.

New

  • Presets: seven ready-made candles (Firelink Candle, Altar Trio, Cathedral Cluster, Votive Row, Fresh Candle, Burnt Stub, Skull Stub), Game Low Poly, your own presets and Reset to Defaults.
  • Make Game Asset: from a candle in one click, a low poly with UVs, baked base color, normal and AO textures, LOD1 and LOD2, a UCX collision hull, the Unreal FBX and the _low / _high pair for Substance 3D Painter.
  • Flame sockets in the FBX (SOCKET_Flame_01…) for Unreal, and how to make the wax material there.
  • Mark as Asset, and Rebuild All Candles (Mesh Detail).
  • Several candles at once: with several candles selected, the setting changed goes to all of them; Make HP Copy and Export FBX work on all of them.
  • Supports made of one mesh with several levels (shelves, steps, niches): the candle stands on the level under the 3D cursor, the one clicked with the eyedropper, the one the mouse points at with G, and stays on it on Rebuild Selected.
  • Scenes with another unit scale (0.01 for Unreal users): sizes are converted, an 11 cm candle is 11 cm.
  • No more freezes: a coarse wax while a value is dragged, a 3 mm preview for candles over about 2,000,000 triangles (Full Detail Anyway builds them all the same), and settings that would need too many wax drops are refused at once.
  • Support is an object field with an eyedropper: with a candle selected, the eyedropper moves the candle onto the object clicked.
  • Show the Candle on a frozen copy; Use the Souls Candle Card in the classic panels.

Changed

  • Requires Blender 5.1 or newer (was 5.0).
  • The panel follows the order of the work: a line at the top always says which candle the settings change (or that they make the next one); BUILD CANDLE, then Build on an Object… and New Seed side by side; Candles holds the cluster and stub settings; Top Rim and Wick next to each other; a Variation section for the seed; Live Update and Rebuild Selected always in view; one Export FBX, at the bottom, with the path it writes to. Sections remember being open or closed. Settings that do nothing are hidden.
  • New names: Build on an Object…, Slide on Object (G), Rebuild Selected, Make HP Copy, Smallest Detail, Burnt Down to a Stub, Height Left, Lump Depth, Ball Density, Candle Count, Shortest / Tallest / Mound Height, Stands On, Object Name, Export Folder, Live Update, New Seed, and the heights named by position (Front Left, Back…). Settings in Title Case. Files made with older versions open the same.
  • The support is kept as an object: renaming it changes nothing; deleting it is said in the status line (the candle keeps its wax, never drops to the floor). A name typed that matches nothing is said too.
  • Settings change the selected candle only, not one that is merely active.
  • Export FBX: file names cleaned, asks before replacing a file, shows the full path, keeps the candle’s scale, exports smoothing groups, and only exports candles and their copies.
  • Candles standing on a dense object rebuild faster: the object is read once.
  • Greyed buttons say why in their tooltip; warnings show in orange.
  • The status line shows the triangle count after every change, and an update that fits no candle keeps the wax and says why. A cluster that cannot place every candle says how many fit and why.
  • The Object Name field renames the selected candle. New Seed follows Live Update.
  • Crater Depth and Lump Depth say what they really do.

Known limitations

  • On an object, wax inside the support stays in the mesh, hidden.
  • A candle does not follow a moved support until Rebuild Selected.
  • Make Game Asset decimates the wax and unwraps it with Smart UV Project: for a hand-made low poly or hand-made UVs, start from the HP copy in your usual tools.
  • Blender 5.1 is the minimum; only Blender 5.1.2 has been tested.

1.1.1 — Autosave

Version1.1.1
Date2026-11-09
Blender compatibilityBlender 5.0 or newer, tested on Blender 5.1.2
Store statusAvailable on Gumroad — coming soon on Superhive

Fixed

  • Once the Souls Candle tab had been shown, Blender stopped saving its autosave file: the panel listened to the mouse all the time, and Blender does not autosave while an add-on does. The panel now listens to the mouse only while the pointer is over it, so the autosave keeps running.

1.1.0 — Pipette and magnet

Version1.1.0
Date2026-11-02
Blender compatibilityBlender 5.0 or newer, tested on Blender 5.1.2
Store statusAvailable on Gumroad — coming soon on Superhive

Added

  • Pick the Object to Stand On: a pipette. Click an object in the viewport and a new candle stands on top of it.
  • Move on Object, also G: the candle follows the mouse on its object and its wax follows. Left click drops it, Esc or right click cancels. On every other object G keeps its usual meaning.
  • A candle moved another way (the Move tool’s gizmo, several objects at once, a typed location) lands back on its object when the move ends.

Changed

  • A candle only stands where it can: not against a steep side, not past an edge. It stops at the nearest place it can stand.
  • Build Candle no longer leaves an empty object: a 3D cursor that is not over the support sends the candle on top of it.
  • Update selected stands the candle back on a support that moved.

Removed

  • Use active object: the pipette replaces it.

1.0.3 — Readable panel

Version1.0.3
Date2026-11-02
Blender compatibilityBlender 5.0 or newer, tested on Blender 5.1.2
Store statusAvailable on Gumroad — coming soon on Superhive

Fixed

  • Settings that are switched off were drawn pale, their values hard to read.

0.3.0 — Flames and wax color

Version0.3.0
Date2026-10-27
Blender compatibilityBlender 5.0 or newer, tested on Blender 5.1.2
Store statusAvailable on Gumroad — coming soon on Superhive

Added

  • Flame: lit, flickering flames and candle lights for Blender renders, as separate objects — never in the wax mesh, the high poly or the FBX. Off by default.
  • Wax color: cream by default, any color from the panel, per candle, carried by the Color attribute into the frozen high poly and the FBX.

Changed

  • On the ground, Build Candle stands the new candle on the ground under the 3D cursor, even when the cursor floats in the air.

Fixed

  • The panel keeps its own fonts when another add-on loads or frees fonts.

0.2.0 — First release

Version0.2.0
Date2026-10-27
Blender compatibilityBlender 5.0 or newer, tested on Blender 5.1.2
Store statusAvailable on Gumroad — coming soon on Superhive

Included

  • Five layouts: Single, Pair, Trio, Row and Cluster with its wax mound.
  • Placement on the ground or on any mesh object: the wax follows its surface and drips over its edges.
  • Wax drips with beads and end drops, puddles, wax balls, Base Stub, melted rim and crater.
  • New and burnt wicks.
  • Mesh Detail: Detail, Fill creases, Simplify.
  • Freeze as mesh (HP) and Export FBX for Unreal Engine.
  • The Souls Candle card with help popups, and Classic panels.

Known limitations

  • High-poly output: the low poly, UVs and textures are made in your usual tools.
  • On an object, wax inside the support stays in the mesh, hidden.
  • The candle does not follow a moved support until Update selected.
  • Blender 5.0 is the minimum; only Blender 5.1.2 has been tested.

Last updated: 2026-11-09

Type to search titles, sections and keywords.