Church pew

Every setting of the church pew in Souls Prop Builder, as the panel shows it.

Church pew: scrolled ends, dished seat, a leaning back with gothic panels, a book shelf. Each panel breaks as one piece.

Dimensions

SettingWhat it does
LengthLength of the pew, in cm, between the outer faces of the two end cappings. Only the seat, back and shelf grow; the ends keep their profile.
DepthDepth of the feet, in cm, front to back. Every side profile (ends, seat, back, shelf) scales with it.
HeightHeight to the top of the scrolls, in cm. Every side profile scales with it.

Ends

SettingWhat it does
End thicknessThickness of each end panel, in cm.
Capping widthWidth of the capping rail on top of each end, the one ending in the two scrolls, in cm. When wider than the end panel, it overhangs on both faces.
End roundingRadius of the rounded edges of the feet, end panels and cappings, in cm. 0 = sharp.
Carved rosettesA rosette carved into both faces of each scroll: grooves and a boss cut into the capping, nothing added on top. Its depth is limited by how far the capping overhangs.

Back

SettingWhat it does
Back panelsNumber of panels in the back (1 to 12), each between two stiles. More panels means narrower ones.
Stile widthWidth of the upright stiles between the back panels, in cm. Wider stiles leave narrower panels.
Gothic openingsA pointed-arch opening cut through each back panel, framed by a molding standing proud front and back. The frame is carved in the panel, so the panel breaks as one piece.
Panel beadsA thin molding standing proud round each back panel, carved in the same board.

Seat and shelf

SettingWhat it does
StretcherA low rail between the two ends, its tenons going into the end panels.
Book shelfA shelf behind the back, with rounded back corners, shaped brackets under it and a shaped cheek at each end.
Shelf bracketsNumber of shaped brackets under the shelf (2 to 12), spread evenly from end to end.
Edge roundingRadius of the rounded edges of the seat, rails, stiles, stretcher and shelf, in cm (0.3 cm at most on the back panels, brackets and cheeks). 0 = sharp.
Rounding segmentsFaces in each rounded edge (1 to 8); the ends get one more. More is smoother but heavier.

Last updated: 2026-11-09

Type to search titles, sections and keywords.