Explosions, break point and cover

Where a break starts (Break Presentation Socket), props that explode when they break (Explosion module), and props that shield characters from explosions (Damage Cover, Find SDF Damage Cover).

Strike a powder keg and it breaks; one frame later it explodes from its break point. The characters around it take damage, the props around it break, and an explosive prop among them explodes in turn, one frame later. A crate set as cover, standing between the keg and a character, spares that character.

Three settings make this, each described below:

SettingWhereDefault
Break Presentation SocketThe setup (it belongs to the model)empty: the centre of the intact bounds
Explosion module, or the Override Explosion exceptionA Behavior, one setup or one placed copyoff
Is Damage Cover, or the Override Damage Cover exceptionA Behavior, one setup or one placed copyoff

The break point

Break Presentation Socket, on the setup, names a socket of the intact mesh. The break’s sound, effect, AI noise, loot (unless a Loot Spawn Component is set) and explosion start there.

Empty, or a socket the mesh does not have: the centre of the prop’s intact bounds, as in SDF 1.0.

Two breaks keep their own point whatever the socket:

  • A projectile’s break sound still plays where it struck.
  • A prop broken by its fall raises its break effect where it met the ground, rising out of it.

The break point belongs to the model, so it has no exception: every copy of the setup uses it.

Explode On Break

Add the Explosion module to a Behavior, or tick the Override Explosion exception, with Explode On Break on, on one setup’s Overrides or one placed copy’s Instance Overrides. One frame after the prop breaks, it explodes from its break point. Off by default.

Characters

Characters take Unreal damage through ApplyRadialDamageWithFalloff: they receive it in TakeDamage like any radial damage.

SettingDefaultWhat it does
Explosion Radius400 cmHow far the explosion reaches, for characters and props
Explosion Full Damage Radius100 cmCloser than this, a character takes the full Explosion Damage
Explosion Damage50Damage near the centre
Explosion Minimum Damage0The least damage a character inside the radius takes
Explosion Damage Falloff1How the damage drops from the full-damage radius to the edge: 1 is linear, higher drops faster
Explosion Damage TypeemptyThe damage type characters receive; Unreal’s default when empty
Explosion Damage Prevention ChannelVisibilityA character behind anything that blocks this channel is spared

A character behind anything that blocks Explosion Damage Prevention Channel is spared, as with any Unreal radial damage: walls, and the intact props that block that channel. The prop’s own debris never shield anyone. A character behind a standing Damage Cover prop is spared too, whatever the channel.

Props

SettingDefaultWhat it does
Explosion Breaks PropsonThe explosion hits the destructibles around it through SDF’s radial destruction
Explosion Prop Damage200Damage dealt to the props around it, at its centre
Explosion Prop PowerHeavyDestruction Power against the props around it
Explosion Impulse1500How hard it throws the debris of the props it breaks

The props are reached through radial destruction, so each prop judges the hit by its own rules: a prop that needs Massive holds a Heavy blast. An explosive prop it breaks explodes in turn, one frame later. A broken prop cannot break again, so each prop explodes once, and a chain of kegs goes off one frame apart rather than inside one another’s explosion.

Explosion Ignites

Explosion Ignites (off by default) also sets alight the Flammable props whose centre lies within the explosion’s radius. It sets them alight before it breaks them, so those it breaks burn on in their debris. In the demo’s powder fuse, the keg’s blast has Explosion Ignites on and Explosion Prop Damage 0, and sets the four barrels beyond it alight. See Fire and burning props.

Exception or module

The Override Explosion exception holds Explode On Break, Explosion Radius, Explosion Damage, Explosion Prop Damage and Explosion Ignites. The others (full damage radius, minimum damage, falloff, damage type, prevention channel, Explosion Breaks Props, Explosion Prop Power and Explosion Impulse) are set on the Explosion module only. See Exceptions for one setup or one prop.

When it goes off, and when it does not

  • Only the machine with authority sets the explosion off. In a networked game that is the server: the other machines see the break, and the props it breaks reach them as their own breaks.
  • A prop restored whole before the next frame does not explode.
  • A prop loaded already broken never explodes.

Its sound, effect and events

The Explosion module has no sound or effect of its own: the blast you see and hear is the prop’s break sound and break effect, from its Material. The demo powder keg uses its own copy of the Wood Material, DA_SDF_Mat_PowderKeg, with the break sound Demo/Audio/ExplosiveBarrel/SC_SDF_Barrel_Explode and the break effect FX/Niagara/NS_SDF_Barrel_Explosion.

  • OnBreakExplosion(Origin, PropsResult) fires on the destructible component when it explodes: add your own effect, camera shake or sound there. PropsResult is what the radial destruction reached, empty when the explosion does not break props. Describe SDF Radial Result turns it into one sentence.
  • GetBreakExplosionCount() counts the explosions since the prop last stood whole.

Recipe: the demo powder keg

On a shelf of the showcase’s projectile range, one arrow or the sword breaks the powder keg, and one frame later it explodes: the explosion sound and effect play, and the two barrels behind it break.

  1. Generate the keg with the Wooden Barrel (Semantic) preset.
  2. On its setup’s Overrides, tick Override Projectile Policy with Breakable by Projectile on: the barrel preset alone only lets arrows stick.
  3. On the same Overrides, tick Override Explosion (Explosion Radius 400, Explosion Damage 50, Explosion Prop Damage 200 by default).
  4. For the blast, duplicate the Wood Material and give it the break sound Demo/Audio/ExplosiveBarrel/SC_SDF_Barrel_Explode and the break effect FX/Niagara/NS_SDF_Barrel_Explosion, as DA_SDF_Mat_PowderKeg does.

An arrow breaks it only with a Projectile Profile of Light power or more. The keg placed on the range sets Explosion Radius 120 in its Instance Overrides, so that the range’s other targets stay to be shot; its setup, and any keg placed anew, reaches 4 m.

In the fire arena’s powder fuse, the keg burns (Burn Time 6) and its blast, with Explosion Ignites on and Explosion Prop Damage 0, sets four barrels beyond it alight. See Playable demo.

Damage Cover

Tick Is Damage Cover on a Behavior, or the Override Damage Cover exception on one setup or one placed copy. While it stands, the prop shields the characters behind it from SDF explosions, even when it lets the prevention channel through. Off by default; no shipped preset turns it on.

  • The test uses the prop’s own shape, whatever channels it blocks.
  • A broken cover prop covers nothing.

Find SDF Damage Cover

Find SDF Damage Cover (USDFDestructionSubsystem::FindDamageCover(From, To, IgnoredActor)) returns the standing cover prop between two points, nearest to From, or none. SDF’s explosions already ask it. Ask it in your own melee or projectile code before hurting a character: a covered character is shielded. The prop of IgnoredActor is never its cover.

Before your attack hurts a character
    -> Get World Subsystem (SDF Destruction Subsystem)
    -> Find SDF Damage Cover
         From          = where the attack comes from
         To            = the character's location
         Ignored Actor = the attacker
    -> Is Valid
         True  -> the character is covered: no damage
         False -> apply your damage

Cover shields from SDF explosions only

Damage Cover changes nothing in your own damage code by itself. A sword, an arrow or a spell of your game respects cover only if that code asks Find SDF Damage Cover before it hurts a character.

Last updated: 2026-10-27

Type to search titles, sections and keywords.