Exceptions for one setup or one prop
Setup Overrides and placed-copy Instance Overrides, the exceptions they offer, what Create Destructible writes as exceptions, and the settings that have no exception.
Every door of a cellar shares the same Behavior, but the one that guards a shortcut must hold until a lever opens it. Every barrel shares the Wood material, but one placed copy should explode. You do not need a new shared asset for that: set an exception. The prop keeps its Behavior and Material and differs only where you tick a box.
Two places for an exception
| Where | Field | Applies to |
|---|---|---|
The setup’s destruction profile (DA_SDF_<Name>) | Overrides | Every copy of that prop |
| A placed copy’s SDF Destructible component | Instance Overrides | That copy only, applied after the setup’s own exceptions |
Both fields are the same structure, FSDFLocalOverrides, and offer the same exceptions. Each sits
behind its own Override … box: unticked, the value comes from the Behavior and Material (or, on a
placed copy, from the setup’s exception); ticked, the values under the box apply.
To set one on a placed copy, select the actor in the level, select its SDF Destructible component, open Instance Overrides in the Details panel and tick the box. On the setup, open the profile asset and use Overrides.
Check the values after ticking
A box starts from the values shown in the table below, which are usually the opposite of the shared default: ticking Override Camera And Characters starts with both blocks off, ticking Override Persistence Lifetime starts at Permanent. Read the values under the box before you play.
The exceptions
| Box | Values under it (as they start) | What it changes | More |
|---|---|---|---|
| Override Health | Use Health (on), Max Health (100), Health Mode (Health Points), Hits To Break (3, with Number of Hits) | The health pool, counted in health points or in hits. Acts only on a prop that does not break on its first valid hit | Health points or number of hits |
| Override Single Hit | Destroy On Single Valid Hit (on) | Whether the first valid hit breaks it | Breaking rules |
| Override Minimum Power | Minimum Destruction Power (Very Light) | The power a hit needs | Breaking rules |
| Override Physics Mode | Physics Mode (Keep Existing) | Intact physics: Keep Existing, Static or Simulated | Intact physics |
| Override Projectile Policy | Projectile Impact Policy (the whole policy) | How projectiles damage it and what they do after | Projectiles |
| Override Debris Settings | Debris Settings | Keep or remove the debris, and when | Debris |
| Override Indestructible | Indestructible (on) | Works both ways: one breakable door can hold, one copy of an indestructible kind can break | Breaking rules |
| Override Protected From Spawn Break | Protected From Spawn Break (on) | Kept when the game clears the place a player appears | Breaking rules |
| Override Defense | Minimum Damage Threshold (0), Damage Threshold Blocks Break (on) | The damage a hit must reach, and whether a weaker hit only reacts | Breaking rules |
| Override Load Protection | Load Protection Seconds (1 s) | No break from its landing just after it appears. 0 turns it off | Breaking rules |
| Override Launch | Scale Launch By Hit Strength (on), Reference Hit Impulse (750), Launch Scale Range (0.6 to 1.8), Maximum Spin Scale (1.5) | Whether a stronger hit throws its pieces further | Breaking rules |
| Override Shard Landing Sounds | Maximum Shard Landing Sounds (1, from 0 to 18) | How many times a glass pane’s shards are heard landing | Audio |
| Override Start At Rest | Start At Rest (on) | A simulated prop starts still until something touches it | Intact physics |
| Override Break Noise | Report Break Noise (on), Break Noise Loudness (1), Break Noise Range (1500 cm) | The noise the AI hears when it breaks | World reacting |
| Override Weapon Recoil | Weapon Recoils When Held (on) | A melee blow it holds makes the weapon bounce back | World reacting |
| Override Allowed Breakers | Allowed Breakers (Everyone), Breaker Tag | Who may break it | Breaking rules |
| Override Contact | Break By Player Contact (on), Break By Enemy Contact (on), Contact Minimum Speed (0), Break When Stood On (off), Stood On Delay Seconds (0), Break When Landed On (off), Landing Minimum Height (200 cm), Report Pawn Touches (off) | What a character’s body does to it | Bodies against props |
| Override Contact Sound | Contact Sound, Contact Sound Cooldown (1 s) | The sound when a body brushes it and it holds | Bodies against props |
| Override Chain | Break What Rests On It (on) | The props resting on it break with it | Bodies against props |
| Override Persistence Lifetime | Persistence Lifetime (Permanent) | How long it stays broken | Broken props remembered |
| Override Remember Debris Layout | Remember Debris Layout (on) | Loaded already broken, its debris come back where they lay | Broken props remembered |
| Override Push When Hit | Push When Hit (on) | A hit that does not break it pushes it, when it simulates physics | Behaviors and Materials |
| Override Debris Pushed By Characters | Debris Pushed By Characters (on) | Characters nudge its debris at their feet | Bodies against props |
| Override Camera And Characters | Intact Blocks Camera (off), Intact Blocks Characters (off), Hide When Blocking View (off) | Whether the standing prop stops the camera and characters, and hides when in the way | Bodies against props |
| Override Navigation | Navigation On Break (Obstacle Until Broken), Debris Affects Navigation (off) | How its break reaches the AI’s paths | Bodies against props |
| Override Explosion | Explode On Break (on), Explosion Radius (400 cm), Explosion Damage (50), Explosion Prop Damage (200), Explosion Ignites (off) | It explodes when it breaks | Explosions |
| Override Damage Cover | Is Damage Cover (on) | While it stands, it shields the characters behind it from SDF explosions | Explosions |
| Override Surface Responses | Surface Responses (none) | Debris landing sounds and effects by surface | Audio |
| Override Attack Damage Table | Attack Damage Table (none) | Each attack’s own damage and power against it | Breaking rules |
| Override Anchored Base | Anchored Base Height (cm) (15), Release Base On Hit (on) | The bottom of a Chaos prop stays where it stood | Authoring overview |
| Override Debris Always Visible | Debris Always Visible (on) | Its debris keep their shadow and are drawn at any distance | Debris |
| Override Partial Break | Partial Break (on), Partial Break Radius (30 cm), Collapse At (0.6) | A hit breaks off only the pieces it reaches | Partial break |
| Override Pieces Pass Through | Pieces Pass Through Each Other (on) | Its broken pieces collide with the world, never with each other | Authoring presets |
| Override Fire | Flammable (on), Burn Time (10 s), Burn Break At (0.5), Burns Without Breaking (off), Spreads Fire (on), Burn Damage Per Second (0) | It can burn | Fire |
Breaker Tag is shown when Allowed Breakers is Tagged Attackers Only.
A placed copy’s exceptions are applied last, on top of the setup’s Behavior, Material and exceptions.
GetEffectiveProfile() returns the result; after changing an exception while the game runs, call
RefreshEffectiveProfile() on the component. See
The effective profile.
Exceptions written by Create Destructible
Some choices of the authoring window are recorded as exceptions on the generated setup, so the shared Behavior and Material stay untouched:
- A Max Health (0 = Behavior’s) above 0 becomes Override Health, with Use Health on and that Max Health, and Override Single Hit, with Destroy On Single Valid Hit off.
- A Hits To Break (0 = Health Points) above 0 does the same, with Health Mode set to Number of Hits and that Hits To Break: the prop breaks on that valid hit whatever the weapon’s damage.
- Push When Hit becomes Override Push When Hit when the picked Behavior does not already push.
- A Physics, Debris Behavior or projectile choice that differs from what the picked Behavior and Material give becomes Override Physics Mode, Override Debris Settings or Override Projectile Policy.
Only what you chose, and only where it differs from the shared assets, is written: a template default never overrides the Behavior you picked. Modify Destructible changes these choices and writes the exceptions again.
Hand-set exceptions on a generated setup
An exception you tick by hand in a generated setup’s Overrides is an edit of the generated profile. Validate Destructible reports the profile as changed, and Regenerate or Modify rebuild the profile from the recorded choices, replacing it only after your second confirmation. Exceptions on placed copies (Instance Overrides) live in your levels and are never touched by a rebuild. See Validation and regeneration.
Settings with no exception
These have no Override box. Set them on a Behavior or a Material:
- the break and hit sounds, effects and decals, and the Material’s Impact Presentation Cooldown;
- Minimum Impact Speed;
- Damage Multiplier, Impact Damage Multiplier, Allow Power Override and Instant Break Power;
- the settings of the Fall, Propagation and HitReaction modules;
- Contact Break Power and the SDF 1.0 Break By Pawn Collision settings of the Contact module;
- Break Noise Tag;
- the finer explosion settings: Explosion Full Damage Radius, Explosion Minimum Damage, Explosion Damage Falloff, Explosion Damage Type, Explosion Damage Prevention Channel, Explosion Breaks Props, Explosion Prop Power, Explosion Impulse;
- the finer fire settings: Fire Spread Radius, Fire Spread Delay, Burn Damage Reach, Burn Damage Type, Water Puts Out Fire, and the fire’s effects, overlay and sounds.
To give one setup its own value, duplicate the shared asset into your project content and pick the duplicate for that setup. To give one placed copy its own, assign that copy a duplicate of its setup (the component’s Destruction Profile) that references the duplicated asset.
Other per-copy settings on the component
The SDF Destructible component also carries per-copy settings outside Instance Overrides, most of them from SDF 1.0:
| Setting | Purpose | More |
|---|---|---|
| Intact Physics (Override) | Use Profile, Force Static or Force Simulated for this copy | Intact physics |
| Breakable by Projectile (Override), Reaction When Target Survives (Override), Reaction When Target Breaks (Override), Max Embedded Projectiles (Override) | Projectile answers for this copy | Projectiles |
| Customize Debris Settings | This copy’s own Debris Behavior | Debris |
| Destruction Zone Id, Participates In Persistence, Persistent Id Override, Start Broken | How this copy is remembered broken | Broken props remembered |
On SDF’s destructible Actor itself, not its component, Use Mesh Collision When Intact (off by default, new in 2.0.1) makes one placed copy, or every copy of its Blueprint, collide with its Static Mesh’s own simple collision while intact. See Intact collision.
Last updated: 2026-10-29