High-back chair

Every setting of the high-back chair in Souls Prop Builder, as the panel shows it.

Throne-like chair: turned legs, planked seat, a framed board back with a crest, scrolled arms. Every part is its own SDF body.

Dimensions

SettingWhat it does
WidthWidth of the chair, in cm, across the outer faces of the legs. The seat, back and crest scale with it.
DepthDepth of the chair, in cm, from the front of the front legs to the back of the back posts.
HeightHeight to the tip of the crest, in cm. Every height on the chair (seat, arms, rings, back) scales with it.

Seat, legs and back

SettingWhat it does
Seat planksNumber of seat planks side by side from front to back (1 to 12). Planks that meet a leg are notched round it.
Plank gapSpace between the seat planks, in cm.
Leg sizeWidth of the square leg blocks, in cm. The turned rings, the finials and the arms grow or shrink with it.
Back boardsNumber of upright boards filling the back frame, side by side (1 to 12).
CrestThe shaped crest on top of the back: small round lobes stepping up to a pointed top in the middle.
FinialsA turned ball on top of each back post.
ArmsTwo flat arms resting on the front legs and running through the back posts, with a rolled-down scroll at the front.
Edge roundingRadius of the rounding on the edges of the pieces, in cm. 0 = sharp edges.
Rounding segmentsFaces in each rounded edge (1 to 8): more is smoother but heavier.

Last updated: 2026-11-09

Type to search titles, sections and keywords.