Release notes
What changed in each version of Fetter Pro.
- 1.10.0 - New padlocks and hook, modelled by hand: Padlock Style is now Medieval (a shield-shaped forged lock, keyhole on the front) or Modern (a block lock, key at the bottom), and the hook an Eye Hook (a forged hook on a riveted swivel eye); the S-Hook stays. Each is under 1,500 triangles, unwrapped with no overlap, and keeps its own sharp edges. Where the shackle or the eye goes through a link it is made thinner if the link is too tight for it. On a chain lying on a surface, the shackle slides up the link’s hole and the lock turns up just enough to rest over its neighbours. Wraps made with the old styles get the nearest model: Block becomes Modern, Round becomes Medieval, Grab Hook becomes Eye Hook.
- 1.9.0 - Coiled Rope and Coiled Chain: a coil on its own, made at the 3D cursor, hung on a peg (its origin on the peg, the loops gathered on it so a short hook holds them), dropped on the floor or laid flat, with Loops, Size, Loop Width, Messiness, Gather at Peg and Ends. Plain Tube: a rope as a simple tube, a real low poly; the bake pair of a rope now makes its _low as that tube (61,000 triangles down to 4,200 on a coil). Fixed: a spiral of one turn around separate edges was drawn out over their whole length, its strands crossing between two bars; it is now one loop in the middle. A rope around separate edges went through a bar picked by two of its edges; each edge now brings in the bar or post it runs along, all round, wraps made before too.
- 1.8.0 - The panel follows the order of the work: Turns, Tilt, Fit to Surface, Tie Another Object, Links or Rope, Variation, Accessories, Mesh & UVs, then Live Update, Rebuild and Finalize, which now asks first. Before the first wrap the settings are folded; in Edit Mode a line says what the selection will give, and errors show in orange on the card. Clearer names: Lean, Fill Selection, Parallel, Wide Faces and Narrow Faces, Padlock Size and Position, Select Edges or Faces. New: hang a chain or rope between two objects, with Sag; five link shapes (oval, square, round, stud, twisted); rope ends frayed, whipped or knotted; Slack, for rings hanging loose; Presets; Make LODs and Make Bake Pair; Color per Link; one wrap per part; Segments per Twist. Fixed: the card kept Blender from autosaving while the Fetter tab was open; a wrap far too heavy froze Blender, it is now refused with what to change; a material of your own was replaced at every rebuild; a wrap around edges or faces did not follow edits, scale, modifiers or poses of its target; Undo showed the mesh of the step before; short links, rings crossed at 45 degrees, turns closer than the chain is wide and Roll Jitter could cut links or sink them into the target; the link under a padlock cut its neighbours; padlocks and hooks had overlapping UVs; NURBS curves were followed loosely; Draw Wrap went around every part the line’s plane cut, not only those drawn across; rope ends had no UV area; a deleted target or the last wrap stayed in the file; Forward and Backward depended on the vertex order; a loop cut in half by a Mirror modifier gave an open path. Wraps made before keep their shape.
- 1.7.0 - Wrap selected faces: in Face Select mode, the chain or rope goes around the faces you pick and nothing else, to lash three posts together under the boards they hold. Separate edges now hold the wrap the same way: it goes around them only, no longer around the whole object, and the turns stay where every edge is. Wraps made before keep their shape. Whole parts selected in Vertex or Edge mode are wrapped around their faces. Height now works around separate edges and faces too. The origin of a wrap now sits in its middle, not at the world origin. Fixed: on a chain running level, around a post or a pillar, the padlock lay on its side along the chain; it now hangs straight down from the outer side of its link. Padlocks also sit closer to the chain.
- 1.6.0 - Chain on Curve and Rope on Curve: a pipette picks a curve, and a chain or a rope lies along it, every spline of it (Bezier, poly or NURBS), with all the link, rope, padlock and hook settings. Edit the curve and it follows. Fixed: a hidden wrap lifted the wraps made after it on the same object, which then floated around it; hidden wraps are now left out.
- 1.5.0 - Tie Another Object: a pipette picks a second object, and the wrap goes around both, to tie a skeleton to a tree. Draw Wrap: drag a line across the object instead of selecting edges. Height and Angle adjust the wrap afterwards. A number typed without a unit now keeps the unit the field shows: 5 in a field that reads 3 cm gives 5 cm, not 5 m. A length at 0 reads 0 cm, so 5 typed there gives 5 cm. The card ends on the copyright and a link to the studio’s site.
- 1.4.0 - Tighten closes the wrap in until every link rests on the surface, or pushes it away. Follow Shape wraps the part of the mesh under the turn, not the convex hull of the whole object. Fixed: settings that are switched off were drawn pale, their values hard to read.
- 1.3.0 - Before the first wrap, the card shows every setting greyed out with Select edges first. The card ends under its content. Fixed: the card title could show another add-on’s font.
- 1.2.0 - Padlocks (Block, Round) and hooks (Grab Hook, S-Hook).
- 1.1.0 - The Fetter card with info popups and diagrams on every control; Classic Panels option.
- 1.0.2 - Wrap around separate edges with Fit to Edges; Triangles per Link.
- 1.0.0 - First release.
Credits and license
- Fetter Pro, copyright 2026 GreyFox Studio - https://unreal-engine.greyfoxstudio.ca
- The add-on’s code is licensed under the GNU General Public License v3.0 or later (GPL-3.0-or-later).
- The bundled Inter fonts (Inter-Bold.ttf, Inter-SemiBold.ttf) are copyright
2016 The Inter Project Authors, under the SIL Open Font License 1.1
(
Inter-OFL.txt). - Support: support@greyfoxstudio.ca
Last updated: 2026-11-18